\ n
\ n
\ n \ n \ n
Item name |
High pressure titanium flange |
Standard |
ASME/ANSI B16.5,DIN2630~2633,BS etc |
Material |
Gr2 |
Size |
1/2''~80''(DN10~600) |
Thickness |
SCH20, SCH30, SCH40, STD, SCH80, SCH100, SCH120, SCH160, XXS |
Pressure rating |
0.6~32Mp |
(DIN) PN6,PN10,PN16,PN25 though PN250 |
(ASNI) CL150,CL300,CL600,CL900,CL1500 |
Working temperature |
-60°C~250°C |
Type |
Plate, threaded, slip-on, socket welding, lap joint, blind, welding neck |
Flange face |
FF,RF,TG,RJ etc |
Surface treatment |
Rust-proof oil, Black, Galvanized |
Quality control |
Ultrasonic Testing & Material Test Report |
Packaging |
Plywood case line with foam or as per clients request |
Produktbeschreibung \ n
Item name |
high pressure titanium flange |
Standard |
ASME/ANSI B16.5,DIN2630~2633,BS etc |
Material |
Gr2 |
Size |
1/2''~80''(DN10~600) |
Thickness |
SCH20, SCH30, SCH40, STD, SCH80, SCH100, SCH120, SCH160, XXS |
Pressure rating |
0.6~32Mp |
(DIN) PN6,PN10,PN16,PN25 though PN250 |
(ASNI) CL150,CL300,CL600,CL900,CL1500 |
Working temperature |
-60°C~250°C |
Type |
Plate, threaded, slip-on, socket welding, lap joint, blind, welding neck |
Flange face |
FF,RF,TG,RJ etc |
Surface treatment |
Rust-proof oil, Black, Galvanized |
Quality control |
Ultrasonic Testing & Material Test Report |
Packaging |
Plywood case line with foam or as per clients request |
Standard |
GB/T 2965-2007, GB/T13810-2007, ASTM B348/ASME SB348, ASTMF67, ASTM F136, ISO-5832-2(3), AMS4928, MIL-T-9047, JIS etc |
Grade |
TA1-TA4, TA8-TA10, TA15-TA18, GR1-GR5, GR7, GR9, GR11, GR12, TI-6AL-4V, TI-6AL-4V ELI |
Diameter |
1.0-300mm |
Length |
1000mm-12000mm |
Technique |
Hot Forging & Hot Rolling |
Surface |
Bright |
Shape |
Round, flat, square, hexagonal |
Application |
Metallurgy, electronics, medical, chemical, petroleum, pharmaceutical, aerospace, etc. |
Grad Kontrast
|
America |
Russia |
Japan |
TA1 |
Industrially Pure Titanium
|
GR1 |
BT1-00 |
TP270 |
TA2 |
GR2 |
BT1-0 |
TP340 |
TA3 |
GR3 |
|
TP450 |
TA4 |
GR4 |
|
TP550 |
TA8 |
Ti-0.05Pd |
GR16 |
|
|
TA9 |
Ti-0.2Pd |
GR7 |
|
TP340Pb |
TA10 |
Ti-0.3Mo-0.8Ni |
GR12 |
|
|
TA18 |
Ti-3Al-2.5V |
GR9 |
0T4-1B |
TAP3250 |
TB5 |
Ti-15V-3Al-3Gr-3Sn |
Ti-15333 |
|
|
TC4 |
Ti-6Al-4V |
GR5 |
BT6 |
TAP6400 |
Mechanische Eigenschaften
|
|
|
|
Elongation |
Area of Reducation |
Ksi |
Mpa |
Ksi |
Mpa |
|
|
GR1 |
|
35 |
240 |
25 |
170 |
24 |
30 |
GR2 |
50 |
345 |
40 |
275 |
20 |
30 |
GR3 |
65 |
450 |
55 |
380 |
18 |
30 |
GR4 |
80 |
550 |
70 |
483 |
15 |
25 |
GR5 |
130 |
895 |
120 |
828 |
10 |
25 |
TI-6AL-4VELI |
125 |
860 |
115 |
795 |
10 |
25 |
GR6 |
120 |
828 |
115 |
483 |
15 |
25 |
GR7 |
50 |
345 |
40 |
275 |
20 |
30 |
GR9 |
90 |
620 |
70 |
483 |
15 |
25 |
GR11 |
35 |
240 |
25 |
170 |
24 |
30 |
GR12 |
70 |
483 |
50 |
345 |
18 |
25 |
\ n Vorteile von Titanmaterialien
Six Characters of Titanium |
1. High Strength |
Titanium strength/density ratio is better than other metals, components with high strength, good rigity, less weight can be made out of titanium. Titanium is applied for aircrafts engines, frames, skins, fastners and landing gears. |
2. Anti-Corrosion |
Compared with stainless steel, titanium alloy's corrosion is better in moisture laden air, seawater, titanium greatly resists spot corrosion, acid corrosion and stress corrosion. Titanium resists corrosions to alkali, chloride, chlorinated organic sunstances, sulphuric acid, nitric acid. |
3. High-Temperature Resistance |
Titanium application temperature's higher than aluminium alloys. Titanium can work in 450-500℃ for long time. Titanium alloy stil prossesses high strength when working in 150-500℃. Titanium working temperature can be reached to 500℃ |
4. Low Temperature Resistance |
Titanium alloys still owns its mechanical properties when working in low or super low temperature conditions. Titanium alloys with low-temperature resisitance and extra low interstitial still possess good ductility, therefore, titanium alloy is sort of good low temperature structural material. |
5. Eco-Friendly Metal |
Thermal conductivity of titanium is lower than carbon steel or copper, but titanium owns very good corrosion resistance, therefore, titanium thickness can be greatly reduced, also the heat exchange mode is dropwise condensation between titanium and steam. This kind of mode reduces heat transfer resistance, no fouling on titanium surface, which makes titanium thermal conductivity better. |
6. Good Thermal Conductivity |
Titanium is non-magnetic metal, it can't be magnetized in large magnetic field, also titanium is toxic-free and compatibility with blood, there, titanium is applied in medical field. |
\ n Hauptprodukte \ n
\ n \ n Zertifizierung \ n
\ n \ n Wir freuen uns, Ihnen mitteilen zu können, dass wir der Trade Assurance auf Alibaba beigetreten sind, um Ihre Zahlung zu schützen und sicherzustellen, dass wir pünktlich liefern und hochwertige Produkte nach Bedarf herstellen.
\ n Unsere Fabrik \ n
\ n \ n \ n \ n \ n Kontakt \ n \ n \ n \ n SHAANXI YUNZHONG INDUSTRIEENTWICKLUNG COD., LTD \ n \ n HINZUFÜGEN: Nr.128 Gaoxin Road, Baoji City, Provinz Shaanxi \ n PC: 721013 \ n Skype: sally.deng (AT) yunch.tech \ n TEL: + 86-917-3373399 \ n Fax: + 86-917-3373378 \ n Mobil: + 86-186-9172-5197 \ n E-Mail : sally.deng (AT) yunch.tech \ n Web: \ n \ n Ähnliche Produkte \ nTitan-Platte: 1, 3, 4, 5, 7, 11, 9, 12 n Titanstab / -stab: Grad 1, Grad 3, Grad 4, Grad 5, Grad 7, Grad 9, Grad 11, Grad 12 \ n Titandraht: Gr1, Gr2, Gr3, Gr4, Gr5, Gr7, Gr9, Gr12, gr16, gr23 \ n Titaniumrohr / -rohr: Gr1, Gr2, Gr5, GR9 \ n Titanziel: mehr als 99,6% Titan, Form: rundes Target und Plattentarget \ n Titanbefestigung \ n Titananode \ n Titanflansch \ n Nickel und Nickel-Titan-Legierungen: Platte, Stab, Draht, Rohr \ n Tantal: Platte, Stab, Draht, Rohr \ n Niob: Platte, Stab, Draht, Rohr \ n Wolfram: W1, W2. 99,95%, 99,995%, Platte, Stange, Draht, Röhre \ n Molybdän: 99,95%, 99,995%, Platte, Stange, Draht, Röhre \ n \ n \ n \ n
Produktgruppe : Titanium Produkt > Titan-Flansch